-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Book Excerpt: 'The Printed Circuit Designer's Guide to... Designing for Reality,' Chapter 2
January 4, 2024 | I-Connect007 Editorial TeamEstimated reading time: 1 minute
This is an excerpt from Sunstone Circuit's book: The Printed Circuit Designer's Guide to... Designing for Reality by Matt Stevenson
Chapter 2: Variations in the Manufacturing Process
Once a CAD tool is chosen and the basics understood, the thought process should then shift toward the manufacturing of the PCB, before applying electrons to the screen. Let’s get the “bad news” out of the way first. Perfection is an unattainable goal. Don’t expect manufacturing to be perfect. There will always be variations from optimum at every step of every manufacturing process. Designers should recognize that variation and physical challenges within the PCB manufacturing process can be exacerbated by their design decisions. Not to worry, this is easily overcome with forethought during design and a good manufacturing partner.
According to the law of variation as defined in the Statistical Quality Control Handbook, 2nd Edition (January 1982):
- Everything varies. In other words, no two things are exactly alike.
- Groups of things from a constant system of causes tend to be predictable. If outcomes from systems can be predicted, then it follows that they can be anticipated and managed.
In a recent post for bizfluent, Beth Robinson identified the five main sources of process variation: raw materials, equipment, human actions, environment, and method.
Raw Materials
There will be variation in the output of all manufacturing processes and all suppliers.
The materials required in a manufacturing process come most often in either the form of a manufactured material or ore. These suppliers of manufactured material will experience variation during their production process, so there will inevitably be slight inconsistencies in the materials they supply. This can have a cascading effect, creating variations during PCB production and potentially impacting board performance. Raw materials like copper don’t always come from the same source, especially during times when supply chains are compromised (Figure 2.1). Manufacturers and designers may need to consider variations in purity and how they will affect the manufacturing outcome. There are specifications for most of these materials (copper cladding, laminate, etc.) that limit the variation to an agreed upon, acceptable range.
Continue reading the rest of this book at I-007eBooks.
Suggested Items
U.S. Companies Invest Heavily in Robots
04/30/2024 | IFRManufacturing companies in the United States have invested heavily in more automation: total installations of industrial robots rose by 12% and reached 44,303 units in 2023. Number one adopter is the car industry followed by the electrical and electronics sector.
Flex Receives Ericsson 2023 Supplier Sustainability Award
04/30/2024 | FlexEricsson recently awarded Flex with its 2023 Supplier Sustainability Award — the second time since 2021. The award recognizes the extended supply chain benefits from sustainable manufacturing operations in the Flex facility in Tczew, Poland, that runs on 100 percent renewable energy.
USPAE to Springboard U.S. Technology Forward
04/30/2024 | Marcy LaRont, PCB007 MagazineThe U.S. Partnership for Assured Electronics (USPAE) was launched as a nonprofit subsidiary of IPC in 2020, specifically to manage the DoD relationship and access to funding, and to develop a cooperative facility to develop UHDI capabilities in the U.S., not only for the defense sector, but for the whole of the U.S. electronics industry. It is a tall order, but industry veteran Joe O'Neil believes it will happen. Having been tasked with making the UHDI Capable Cooperative Production Facility (UCCPF) a reality, he provides an update on this important project for U.S. electronics manufacturing.
Real Time with… IPC APEX EXPO 2024: Insight into Summit Interconnect's Success
04/30/2024 | Real Time with...IPC APEX EXPOShane Whiteside, CEO of Summit Interconnect, discusses the company's recent recognition as one of the best PCB fabricators in the industry by receiving IPC's Peter Sarmanian award. Whiteside touches on the impact of changes in the marketplace, such as the Defense Production Act and presidential determination, on their growth. Whiteside also shares the company's focus on mechanical and data automation to enhance manufacturing processes and anticipates more automation and evolution in the industry.
Latest Test and Inspection Solutions from GOEPEL electronic at SMTconnect 2024
04/29/2024 | GOEPEL electronicGOEPEL electronic will be demonstrating automated test and inspection equipment at SMTconnect, taking place in Nuremberg from June 11 to 13, 2024.