-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Front-End Expert Mark Thompson of Prototron Circuits Publishes Book on Producing the Perfect Data Package
October 3, 2018 | Dan BeaulieuEstimated reading time: 4 minutes
Mark Thompson, engineering support and CID+ at Prototron Circuits, sees thousands of data packages each year. He has seen the best (and the rest) and he understands that many data packages are far from perfect. Errors and inaccuracies slow the process down because the CAM department has to correct their data package or ask customers to clarify their intent. In the quick-turn prototype business where people pay for time, a slowdown on a three-day turn can be a disaster. I recently sat down with Thompson to find out more about his new book and discuss the quest for the perfect data package.
Dan Beaulieu: Mark, thanks for speaking with me today. First, tell me a little bit about yourself.
Mark Thompson: Always a pleasure to talk with you, Dan. Prototron Circuits has been in business since 1987, but I joined in 1993. It's hard to believe it was 25 years ago. My background is from Silicon Valley in the 1980s. I started as a driller and worked in imaging for a few years, but for the vast majority of my time at Prototron, I've focused on signal integrity and doing calculations and dielectric stackups. We all wear a few hats, so I can go from previewing data before release to CAM and answering any customer questions that may arise.
I’ve also written a monthly column called “The Bare (Board) Truth.” I-Connect007 approached me many years ago and asked if I could write a column dedicated to PCB fabrication, since they already had excellent coverage of design and assembly. I was surprised at how well received some of my initial columns were. I think my column has done well because I will not write about anything I am not confident about; the information is always the truth as I know it. Recently, I have been more involved with site visits to educate our customers about what is needed to make the product they want and minimize costly revisions.
Beaulieu: With your experience in mind, tell us about your new book.
Thompson: The book is called The Printed Circuit Designer’s Guide to… Producing the Perfect Data Package. It provides guidelines for necessary minimum files to be able to fabricate a PCB and why fabricators need them.
Beaulieu: Why did you think this book was needed?
Thompson: For years, the PCB fabrication community has been asked for increasingly faster quotes, but the incoming data sets provided by some customers were rife with questions and inconsistencies. Sometimes data sets were completely missing essential files, all of which had to addressed before quoting and delayed the quote process. The book presents a complete list of necessary files and even discusses how to select a board class based on reliability needs. I also offer some tips and tricks to streamline fabrication.
Beaulieu: Why is Prototron particularly interested in receiving perfect data packages?
Thompson: As I mentioned before, if we can get a data set that is complete and has no conflicting information that requires additional clarification before quoting, we can quote the job faster. It seems counterintuitive that a customer would be frustrated by the questions being asked by fabricators, which stem from conflicting or missing information. There is a fine line between due diligence and being a pest.
Beaulieu: Can you give me some examples of the type of mistakes you have seen in customer data packages?
Thompson: Heck, yes. Missing NC Drill files, drawings, plating statuses, count discrepancies, impedance callouts for traces that do not exist on the data, etc. I could go on and on. Many of these issues could be eliminated or at least minimized by a thorough design review of the output package provided to fabricators.
Beaulieu: Could you give us some highlights that readers can look forward to in the book?
Thompson: The book discusses the necessary files for a great output package for PCB fabrication, and simple things that can minimize the time spent in a fabrication CAM department, such as IPC netlist errors, how to format files consistently, etc. Additionally, I provide a checklist that can be used to ensure the customers’ output package is complete.
Beaulieu: There is a lot of talk about this technology right now. Why is it so vital at this time?
Thompson: As fast-turn and prototype folks, I can only tell you that we’ve seen a lot more space and flight applications, medical device advances, and RF devices. All of this should make perfect sense, considering how vital our tables and phones have become.
Beaulieu: Who should read this book?
Thompson: Engineering, mechanical, and layout personnel should read it, as well as PCB designers, contract manufacturers, and anyone else who is creating the output data set for fabrication.
Beaulieu: Are you optimistic about getting better data packages in the future?
Thompson: Without a doubt! The millennial generation of designers and engineers are hungry for additional help on what can improve the whole process from design inception to final assembly and product support.
Beaulieu: Once again, congratulations on this effort, and on behalf of the industry, thank you for writing this book. It sounds like we certainly need it.
Thompson: Yes. Thank you for your time.
Click here to download your free copy of Prototron's new eBook 'The Printed Circuit Designer’s Guide to… Producing the Perfect Data Package' today!
Suggested Items
Real Time with... IPC APEX EXPO 2024: Looking Back, Looking Forward With IEC
04/19/2024 | Real Time with...IPC APEX EXPOIEC came to the RTW booth and discussed both the legacy of IEC's past and the vision for its future. Industry veteran Bruno Ferri highlighted his quarter-century tenure in the industry and with IEC since its founding. He still exhibits boundless enthusiasm for the industry. Brando Stone, a young professional and a future face of IEC, talked about IEC's plans going forward and his experience at this year's IPC APEX EXPO.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/19/2024 | Marcy LaRont, PCB007 MagazineFor my must-read picks of the week, I’m highlighting Parker Capers, a young professional seeking employment, solid counsel from Dan Beaulieu on what your post-show plan should look like, more information and insight on “chiplets” and the need for secure data transfer standards from columnist Preeya Kuray, as well as Matt Stevenson’s design for reality wisdom. It’s a reminder to download one of our newest books (there are several) you don't want to miss if you are an assembler.
Real Time with... IPC APEX EXPO 2024: Exploring IPC's PCB Design Courses with Kris Moyer
04/18/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and IPC instructor Kris Moyer discuss IPC's PCB design training and education offerings. They delve into course topics such as design fundamentals, mil/aero, rigid-flex, RF design, and advanced design concepts. They also highlight material selection for high-speed design, thermal management, and dissipation techniques. The interview wraps up with details about how to access these courses online.
IPC Bestows Posthumous Hall of Fame Award to Industry Icon Michael Ford
04/18/2024 | IPCIPC honored the late Michael Ford, Aegis Software, for his extraordinary contributions to the global electronics manufacturing industry with the IPC Raymond E. Pritchard Hall of Fame Award at IPC APEX EXPO 2024. IPC’s most prestigious honor, the Hall of Fame Award is given to individuals who have provided exceptional service and advancement to IPC and the electronics industry. Ford, an industry leader and valued IPC volunteer, died suddenly in January 2024.
Two Industry Rising Stars Recognized at IPC APEX EXPO 2024
04/17/2024 | IPCTwo of the industry’s best and brightest were presented with an IPC Rising Star Award at IPC APEX EXPO 2024 in recognition of their leadership roles and support of IPC standards, education, advocacy, and solutions to industry challenges. Award recipients were Naim Kapadia and Michael Schleicher.